Durable coating polymer ZEFFLE MZ for infectants and sterilants of medical devices
Introduction
With the increasing demand for more infection control, the disinfectant and sterilization of medical devices is becoming more powerful, and the degradation of materials used in medical devices is becoming more serious.
To solve this problem, we offer durable coating materials ZEFFLE MZ that are resistant to various disinfectants and sterilants.
Features
- Excellent chemical resistance (ex. VHP sterilization). As refer to Table.1
- It’s possible to coat on resin parts such as endoscope tube.
- ISO10993 (GLP) biocompatibility test have been passed.
- FDA device masterfile (MAF) has been registered.
Table.1 Chemical resistance of ZEFFLE MZ-100 coating films
*STERRADTM 100NX: Evaluation results of STERRADTM 100NX
Hydrogen peroxide gas plasma sterilization evaluation
Evaluation
Test was conducted with STERRADTM 100NX. The ZEFFLE MZ coating remained intact under hydrogen peroxide gas plasma exposure,while the acrylic urethane coating displayed cracking as shown image 1-2.
- System: STERRADTM 100NX
- Hardener: STABiO XD-340N by Mitsui Chemical
- Material: ZEFFLE MZ
- Evaluation cycles: 100 cycles
Image.1 Surface of ZEFFLE MZ coating
Image.2 Surface of acrylic urethane coating
Vaporized hydrogen peroxide (VHP) evaluation
Evaluation
ZEFFLE MZ coating remained intact under VHP, acrylic urethane coating was blistered as shown image.3-6.
- Company: Santasalo and Steri-Pro Solution Corporation
- System: M100MIX
- Material: ZEFFLE MZ
- VHP concentration: 500ppm
- Evaluation time: 35 days (12hr/day)
- Temperature: 25-30℃
- Humidity: 30%RH, 60%RH
Image.3 Surface of acrylic urethane coating
Image.4 SEM of acrylic urethane coating
Image.5 Surface of ZEFFLE MZ coating
Image.6 SEM of ZEFFLF MZ coating
Customer benefits
Expected application example
- Endoscope
- Laparoscope
- Medical robot
- Dialysis system, etc.
Fig.1 Endoscope
Fig.2 Dialysis system
Fig.3 Medical robot
