Fluoropolymers
DESCRIPTION
Fluoropolymers designed to stand the most extreme and unique conditions
Daikin has developed two exhaustive range of fluoropolymers to meet these demanding and various expectations.
- POLYFLON Series, a variety of high-performance PTFE. Available in fine powder, molding powder or dispersion used for tubes, membranes, etc.
- NEOFLON Series, a complete array of melt-processable fluoropolymers such as FEP, PFA, ETFE, PCTFE, suitable for pipe, sealant, roofing, etc.
Fluoropolymers selection guide
- Heat resistance/heat stability
- Weather resistance
- Low friction
- Superior electrical properties
This vast range of high-performance fluoropolymers was also engineered to meet the most diverse processing methods.
DAIKIN fluoropolymers represent an adequate answer to processing challenges. Because each project specification is unique, DAIKIN Technical Expert supports engineers in selecting the right material and save development time.
●: Recommend | PTFE | PFA | FEP | ETFE | EFEP | CPT | PCTFE |
VT (under development) |
|
---|---|---|---|---|---|---|---|---|---|
Chemical field |
Chemical resistance + Heat resistance |
● | ● | ● | ● | ● | ● | ||
Chemical resistance + Mechanical property |
● | ● | ● | ● | |||||
Electronics field | Electrical property | ● | ● | ● | ● | ● | |||
Electrical property + mechanical property |
● | ● | |||||||
Industry field | Low friction | ● | ● | ● | ● | ||||
Low expansion coefficient | ● | ||||||||
Other fields | Weatherability | ● | ● | ● | ● | ● | ● | ● | ● |
Flame retardancy | ● | ● | ● | ● | ● | ● | ● | ● | |
Optical transparency | ● | ● | ● | ● | ● | ● | ● |
GRADES & FEATURES
Type | Main applications | Molding process | Features |
---|---|---|---|
POLYFLON PTFE |
Seals, sheet lining, mold release films, slide bearings, thin skived film for electronic parts, o-rings, filled compounds etc. | Compression molding | Best thermal, electrical, and chemical properties of all fluoropolymers |
POLYFLON PTFE |
Seal tapes, wire insulation, gaskets, tubing, fibers, filtration membrane, and apparel membrane | Paste extrusion molding | Most easily fibrillized under high shear |
POLYFLON PTFE |
Impregnating yarns, glass cloth and other media, binder for batteries, release coatings, circuit board laminates | Impregnation Coating Rolling by mixing with active material |
Aqueous dispersion Most easily fibrillized under high shear |
POLYFLON PTFE |
Gasket, valve seat, packing, bearing, backup ring, piston ring, seal ring, wear ring | Compression molding Automatic molding Ram extrusion molding | New reinforced PTFE that combines the excellent properties of PTFE with the functionality of fillers |
Type | Main applications | Molding Process | FEATURES |
---|---|---|---|
NEOFLON PFA |
Parts for semiconductors (Tube and fitting), Wire & Cable |
Injection molding Extrusion molding |
Melt processable Possesses the same properties as PTFE |
NEOFLON FEP |
Wire & Cable, tubes, films, lining sheet |
Injection molding Extrusion molding |
Melt processable Excellent in chemical resistance and electrical properties same as PTFE and PFA |
NEOFLON ETFE |
Wire & Cable, release Film, roofing Material |
Injection molding Extrusion molding |
Melt processable Superior in mechanical properties (tensile strength and tear strength) |
NEOFLON EFEP |
Fuel tube for automotive, tubes, blow bottle |
Injection molding Extrusion molding |
Melt processable Adheres to other materials Excellent in transparency and processability |
NEOFLON CPT |
Fuel tube for automotive, semiconductors, tubes and sheets | Extrusion molding |
Melt processable low permeability to various chemical agents Suitable for co-extrusion |
NEOFLON PCTFE |
Seals, parts for pump, tubes |
Compression molding Extrusion molding |
Melt processable Superior moisture barrier Superior mechanical properties |